Synology reserves the right to replace memory modules with the same or higher frequency based on supplier's product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
Installing memory modules with differing capacities is not recommended. Check the Hardware Installation Guide of your Synology product for recommended memory configurations.
It is strongly recommended that you only install drives listed on your device's compatibility list. Storage pool and volume creation processes may fail when using unverified drives. Synology is unable to provide technical support for devices using unsupported components.
"Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
External Ports
RJ-45 1GbE LAN Port
SA3410: 4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port
SA3410: 2 (with Link Aggregation / Failover support)
Out-of-Band Management LAN Port
SA3410: 1
Max. number of LAN ports
SA3410: 15
USB 3.2 Gen 1 Port*
SA3410: 2
Expansion Port
SA3410: 1
Notes
SA3410:
This device's 1GbE LAN ports have a maximum transmission unit (MTU) size of 1,500 bytes.
The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.
For more information on how power consumption is measured, refer to this article.
Noise testing was conducted with the Synology system fully installed with Synology SATA SSDs and in an idle state. Two G.R.A.S. type 40AE microphones were placed at a 1 m distance from the front and rear of the device. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%.
Temperature
Operating Temperature
SA3410: 0°C to 35°C (32°F to 95°F)
Storage Temperature
SA3410: -20°C to 60°C (-5°F to 140°F)
Relative Humidity
SA3410: 5% to 95% RH
Certification
SA3410:
FCC
CE
BSMI
VCCI
RCM
UKCA
EAC
CCC
KC
UL
Warranty
SA3410: 5 Years
Notes
SA3410: The warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)
PrinterBullet is the B2B hardware catalogue of RYZEN ESOLUTIONS (M) SDN BHD — every product supplied, installed and supported by our own engineers across Malaysia.
PrinterBullet Powered by RYZEN ESOLUTIONS (M) SDN BHD B-6-1, Jalan BS14/3 Seksyen 14, Taman Bukit Serdang Seksyen 14,
